Ham Radio
Ham Radio, Electronics, Software and more...

Home » Electronics » Arduino » NodeMCU ESP8266 How To on Arduino IDE (NodeMCU ESP8266 How To on Arduino IDE)
NodeMCU ESP8266 How To on Arduino IDE [message #3233] Sat, 05 November 2016 11:28
root is currently offline  root
Messages: 207
Registered: December 2004
Senior Member
1. Install the latest Arduino IDE.
https://www.arduino.cc

2. Open IDE, Files - > Preferences
In additional Boards Manager URL's put in:

http://arduino.esp8266.com/stable/package_esp8266com_index.j son
Click OK.

3. Then, Tools -> Board -> Board Manager an click on esp8266 by ESP8266 Community to install. IDE will install support. (It might take a few minutes, so be patient.)

4. Go to the device manager (Windows) and check to see what the COM port number is of the device. Under ports, you should see something like "USB-SERIAL CH340 (COM27)"

5. Select this Port number in the Arduino IDE -> Tools -> Port

6. The Board selected Tools -> Board should be "NodeMCU 1.0 ESP-12E Module"

[Updated on: Sat, 05 November 2016 18:30]

Report message to a moderator

 
Read Message
Previous Topic: Arduino UNO Serial Port Problems
Goto Forum:
  


Current Time: Thu Nov 23 07:55:03 EST 2017

Total time taken to generate the page: 0.01193 seconds