Ham Radio
Ham Radio, Electronics, Software and more...

Home » Electronics » Circuit Design » Types of Transistors
Types of Transistors [message #78] Thu, 21 September 2006 00:50
kc2nda is currently offline  kc2nda
Messages: 44
Registered: December 2004
Location: New Paltz
Types of transistors

There are two types of standard transistors, NPN and PNP, with different circuit symbols. The letters refer to the layers of semiconductor material used to make the transistor. Most transistors used today are NPN because this is the easiest type to make from silicon. This page is mostly about NPN transistors and if you are new to electronics it is best to start by learning how to use these first.


The leads are labelled base (B), collector (C) and emitter (E).
These terms refer to the internal operation of a transistor but they are not much help in understanding how a transistor is used, so just treat them as labels!

A Darlington pair is two transistors connected together to give a very high current gain.

In addition to standard (bipolar junction) transistors, there are field-effect transistors which are usually referred to as FETs. They have different circuit symbols and properties.
Previous Topic: Circuit Board Traces: Why not 90 Degrees
Next Topic: 2N2222 vs. 2N3904 NPN Transistors
Goto Forum:

Current Time: Mon Dec 17 12:25:16 EST 2018

Total time taken to generate the page: 0.03237 seconds