Ham Radio
Ham Radio, Electronics, Software and more...

Home » Ham Radio Mods » Alinco Mods » Alinco DR-430 Extend Transmit Mod (Alinco DR-430 Extend Transmit Mod)
Alinco DR-430 Extend Transmit Mod [message #3093] Sat, 28 March 2015 02:51
root is currently offline  root
Messages: 207
Registered: December 2004
Senior Member
Alinco DR-430 Extend Transmit Mod

This is the Alinco DR-430 Extended TX modification. This modification will expand TX coverage to
403-499 MHz. Please follow the steps and do the work CAREFULLY! This modification works great
in my rig and I assume this modification will work on almost all 430's (no warranty implied).

1. Unscrew the 3 small screws on the top cover.
2. Gently remove the top cover.
3. Cut the little loop wire (blue) that's located just behind the display, 2" left from the Power
button.
4. Reassemble the radio.
5. Reset the radio's CPU by turning power ON while pressing the F key.

73's & DX de Eduardo "Ed" Sweet - LU7AKC.
Packet radio: lu7akc @ lu7akc.#col.cf.arg.soam
Internet: postmaster@asarin.org.ar
Previous Topic: Alinco DJ-560-T Extend Transmit Frequencies Mod
Next Topic: Alinco DJ-580T Air and Out of Band Mod
Goto Forum:
  


Current Time: Sat Nov 25 02:21:33 EST 2017

Total time taken to generate the page: 0.03528 seconds