Ham Radio
Ham Radio, Electronics, Software and more...

Home » Ham Radio Mods » Icom Mods » ICOM IC-32AT Cross-Band Repeat (ICOM IC-32AT Cross-Band Repeat)
ICOM IC-32AT Cross-Band Repeat [message #3078] Sun, 08 March 2015 22:34
root is currently offline  root
Messages: 207
Registered: December 2004
Senior Member
Icom Service Bulletin #13889-005

The IC-32AT has the capability of being used as a cross-band repeater.
This function is not enabled as the unit is shipped from the factory.

To enable this function perform the following steps:

    1. Cut D912 on LOGIC UNIT. (see above figure)
    2. Push and hold the (FUNCTION) switch.
    3. Push the (C) key.
    4. Push the (6) key.
    5. Push the (D) key.
    6. Release the (FUNCTION) switch. 

To cancel "MINI REPEATER" perform the following steps:
1. Push and hold the (FUNCTION) switch. 2. Push the (D) key. 3. Push the (C) key. 4. Release the (FUNCTION) switch.
Previous Topic: ICOM IC-32AT Hidden Features Mod
Next Topic: ICOM IC-32 Receive Coverage Mod
Goto Forum:
  


Current Time: Tue Nov 21 01:35:52 EST 2017

Total time taken to generate the page: 0.03149 seconds