Ham Radio
Ham Radio, Electronics, Software and more...

Home » Ham Radio Mods » Yaesu Mods » Yaesu FT-301D Display Replacement Kit (Yaesu FT-301D Display Replacement Kit)
Yaesu FT-301D Display Replacement Kit [message #3026] Sat, 01 March 2014 03:58
HB9GAA is currently offline  HB9GAA
Messages: 1
Registered: February 2014
Location: Switzerland
Junior Member
Yaesu FT-301D Display Replacement Kit

Hi, I developed a kit to replace the display board for the FT- 301D. No SMD were used and the kit can be assembled by a radio amateur in about an hour . The new display has, in addition to the frequency display, various advanced features. For example, the supply voltage of the FT- 301D can be measured or the band limits according IARU can be signaled. For disabled HAMs the displayed frequency and voltage is output in Morse code. With an IR remote control parameters can be changed. The software can be updated via the USB interface. A user manual is available on http://shop.elcon.ch/pd-1503415091.htm?defaultVariants=searc h0_EQ_Bausatz_AND_{EOL}&honeyegoryId=1 . The selling price of the kit, depending on demand, is about $90 plus S&H. If you are interested, please write me to hb9gaa@arrl.net[/email] 73 de HB9GAA, Roland

[Updated on: Sat, 28 March 2015 02:37] by Moderator

Report message to a moderator

Previous Topic: Yaesu FTM-400 DR Extended Band Mod 136-174 / 400-480MHz
Next Topic: Yaesu FT-470 RX Frequency Expand Mod
Goto Forum:
  


Current Time: Fri Nov 24 17:10:41 EST 2017

Total time taken to generate the page: 0.03397 seconds