Ham Radio
Ham Radio, Electronics, Software and more...

Home » Ham Radio » Radio Mods » Yaesu Mic to Kenwood Radio Conversion
Yaesu Mic to Kenwood Radio Conversion [message #164] Sun, 03 February 2008 13:20
root is currently offline  root
Messages: 207
Registered: December 2004
Senior Member

Yaesu Mic to Kenwood Radio Conversion


To those who may desire to use a microphone with a different transceiver (other than the original microphone brand) For a Yaesu Mic to work with an Kenwood Radio wire the mic plug as discribed below:

Pin #1 move to Pin #8
#2 move to Pin #6
#3 stays on Pin #3
#4 move to Pin #1
#5 un-solder and tape
#6 un-solder and tape
#7 stays on Pin #7
#8 move to Pin #2 & #5

For Yaesu Mic to work with a Kenwood Radio just reverse the procedure described above.
Note: ALWAYS READ THE SERVICE MANUAL ON BOTH RADIOS BEFORE TRYING THIS MODIFICATION
Previous Topic: Kenwood Mic to Yaesu Radio Conversion
Next Topic: How to expand tx/rx for TM-251A
Goto Forum:
  


Current Time: Mon Nov 20 18:09:24 EST 2017

Total time taken to generate the page: 0.03077 seconds