Ham Radio
Ham Radio, Electronics, Software and more...

Home » Ham Radio » Radio Mods » Kenwood Mic to Yaesu Radio Conversion
Kenwood Mic to Yaesu Radio Conversion [message #163] Sun, 03 February 2008 13:16
root is currently offline  root
Messages: 207
Registered: December 2004
Senior Member

Kenwood Mic to Yaesu Radio Conversion


To those who may desire to use a microphone with a different transceiver (other than the original microphone brand) For a Kenwood Mic to work with an Yaesu Radio wire the mic plug as discribed below:

Pin #1 move to Pin #8
#2 move to Pin #6
#3 stays on Pin #3
#4 move to Pin #1
#5 un-solder and tape
#6 un-solder and tape
#7 stays on Pin #7
#8 move to Pin #2 & #5

Note: ALWAYS READ THE SERVICE MANUAL ON BOTH RADIOS BEFORE TRYING THIS MODIFICATION

[Updated on: Sun, 03 February 2008 13:21]

Report message to a moderator

Previous Topic: Kenwood Mic to Icom Radio Conversion
Next Topic: Yaesu Mic to Kenwood Radio Conversion
Goto Forum:
  


Current Time: Sat Nov 25 02:24:29 EST 2017

Total time taken to generate the page: 0.03550 seconds