Ham Radio
Ham Radio, Electronics, Software and more...

Home » Ham Radio » Radio Mods » Kenwood Mic to Icom Radio Conversion
Kenwood Mic to Icom Radio Conversion [message #162] Sun, 03 February 2008 13:14
root is currently offline  root
Messages: 207
Registered: December 2004
Senior Member

Kenwood Mic to Icom Radio Conversion


To those who may desire to use a microphone with a different transceiver (other than the original microphone brand) For a Kenwood Mic to work with an Icom Radio wire the mic plug as discribed below:

Pin #1 stays on Pin #1
#2 move to Pin #5
#3 stays on Pin #3
#4 stays on Pin #4
#5 move to Pin #2
#6 move to Pin #8
#7 stays on Pin #7
#8 move to Pin #6

For Icom Mic to Kenwood Radio you must preform a special Mod on the mic

Note: ALWAYS READ THE SERVICE MANUAL ON BOTH RADIOS BEFORE TRYING THIS MODIFICATION

[Updated on: Sun, 03 February 2008 13:21]

Report message to a moderator

Previous Topic: Uniden BD996 Discriminator tap
Next Topic: Kenwood Mic to Yaesu Radio Conversion
Goto Forum:
  


Current Time: Thu Nov 23 17:12:39 EST 2017

Total time taken to generate the page: 0.03639 seconds