Ham Radio
Ham Radio, Electronics, Software and more...

Home » Ham Radio » Radio Mods » BC95XLT BC-92XLT BC-72XLT Pro-83 Pro-84 Frequency Counter
BC95XLT BC-92XLT BC-72XLT Pro-83 Pro-84 Frequency Counter [message #146] Sat, 17 November 2007 13:47
root is currently offline  root
Messages: 207
Registered: December 2004
Senior Member
The Uniden BC-95XLT Can Be Used As A Frequency Counter. To enter this mode Press "HOLD,3 and 0" while turning the Power On. You then can change the group of frequencies you wish to check. To do this use the Up and Down Arrow Keys. The Scanner will display the strongest frequency transmitted. Example: To check a Citizens Band Radio frequency, select The Lo group. If you Transmit on Channel 20 the scanner will display 27.205 MHz. You can check with a Ham Radio, Marine, GMRS, etc. It will display the frequency used. This Will also work on Uniden BC-92XLT & BC-72XLT. Should work with Radio Shack PRO-83 & PRO-84.
Previous Topic: Increase the TX power of IC-7000 Mod
Next Topic: Preamp mod for Yaesu FT-890AT
Goto Forum:
  


Current Time: Fri Nov 17 12:48:28 EST 2017

Total time taken to generate the page: 0.03255 seconds