Ham Radio
Ham Radio, Electronics, Software and more...

Home » Ham Radio » Radio Mods » Open Icom IC-M800 or IC-M810 to ham Frequency
Open Icom IC-M800 or IC-M810 to ham Frequency [message #129] Mon, 07 May 2007 20:01
root is currently offline  root
Messages: 207
Registered: December 2004
Senior Member
Open Icom IC-M800 or IC-M810 to ham Frequency

This modification allow the IC-M800 or IC-M810 marine band transceiver to be used in ham bands.

To make this mod you must remove power, disconnect the antenna and remove protective top and bottom cover to gain access to the RF UNIT which is on the lift side of the radio.

This mod require your cut D25 and D26 on this board. Also you must cut wire W1 on the logic unit board.

Previous Topic: Motorola MaxTrac 900 Ham Conversion
Next Topic: IC-P7A MARS Mods
Goto Forum:
  


Current Time: Sat Nov 25 06:19:36 EST 2017

Total time taken to generate the page: 0.03419 seconds